Quote from Skokie on 26/08/2022, 6:43 pm Hi Tom, you can give the BMS device a name: open on the GX Touch for the Cerbo Menu ➡️ CAN-bus BMS b...

Quote from Skokie on 22/08/2022, 7:02 pm Hi Phil, hi Tom in the VRM Portal of Victron Energy you can observe the current limits. See attachment. ...

Jumped the gun earlier today, here are the edits in the afternoon. After changing the default max charge voltage to 12.8V it took a day and a half b...

Quote from LadyHawk on 28/06/2022, 1:18 pm @foxy-kitty Your dashboard is avaliable on the internet now, Philippe mustve set it up for you. Log ont...

Our battery has stabilised at 42% SOC with the charge voltage set at 13.1V. The Quattro is charging the battery between 5-10A to account for the DC lo...

@molly, I'm not an expert and have a Quattro rather than a Multiplus, but I do believe that if you're using CANbus to control charging limits then t...

We're thinking of expanding our battery for more capacity. At present, with electric galley and modest other consumers we can go 2 days without chargi...

It looks like you have a 2P4S configuration and that you connect your cable terminals to a centre point of the connecting bar with a bolt and not to e...

Quote from philtao on 08/05/2022, 8:28 am Hi Jens, The "shutdown" feature is a way to activate relay outputs (or deactivate them if they are activ...

Quote from andreshs1 on 30/04/2022, 12:58 pm Hi @foxy-kitty Great details, thanks! I think that using the finder relay is a great idea, and I cann...

I've made a few changes with my solar arrays and thought I'd document them here as that could help others avoid my initial installation mistakes. Our ...

Thanks @philtao and @ladyhawk above. While we're connected to shore power continuously (as will be the case for the next few months as we live aboar...