@philtao or anyone else, what do you recommend as a charge profile when connected to shore power and living aboard (and using 200-300Ahr at 12V per da...

Hi @andreshs1, I'm not an expert, but I will make comments based on my installation and experience with it. In General you do not specify any sh...

Quote from andreshs1 on 16/03/2022, 8:15 pm Hi @foxy-kitty   Thanks a million for the details, extremely useful! I am going to get a Find...

Quote from philtao on 27/03/2022, 9:09 am These are the only changes made in the v1.31 update, so it is not a critical / security update and there i...

Quote from molly on 03/04/2022, 9:16 am   Will mounting the electronics of the TAO shunt on a Victron smart shunt work, too? And what kind ...

Finally installed the first Finder relay (55.34.9.012.0040) plugged into a Finder relay socket (94.P4) and consolidated our BMS relays: Relay 1 is...

Regarding the Tao BMS relay outputs, as @philtao has written, it is a good idea to use them with your equipment's auxiliary, relay, or remote on-off t...

If you just want to control a single component then Phil's suggestion is the best one - just use one of the TAO BMS relay outputs to connect to the co...

Quote from molly on 19/02/2022, 11:24 am We have a Sterling PCU40 charger with 40A. The sterling service told me, that it is no problem for the char...

Quote from philtao on 05/03/2022, 9:11 am Hi Leigh, I do not have pre-made CANbus cables as each vendor has a different connector and also wiring ...

After reading the article I figured this is a great upgrade so that charge management does not need to be manually updated each time I want to make a ...

Quote from Leigh on 31/08/2021, 3:09 am Hello Phil, Does the TAO BMS talk to the Victron Multi plus with the Cerbo GX so I can turn DVCC (Distribu...