Hello @yachtiritis, If neither the PC nor the Monitor can communicate with the BMS, it seems to be an RS485 connection problem.The problem probably ...

Si l'écran ne répond plus aux interactions utilisateur il se peut que ce soit dû à un plantage du processeur. Il est étonnant qu'un appui prolongé s...

Bonjour Guy, Je me suis permis de déplacer le sujet dans le forum "support utilisateurs". Il y sera plus à sa place. Dans un premier temps pou...

Hi @foxy-kitty, Thanks for the additional information.From what you've described, it doesn't seem that the problem comes from the architecture of yo...

Hello @foxy-kitty,Following an initial analysis of the exported data, several points stand out.The first thing that jumps out is the disparity in char...

Hello Andres,Thanks for your feedback. If I understand correctly, when you draw a large current on your batteries, this generates a temperature differ...

Hi @foxy-kitty,To be able to analyze the situation in more detail, we would need access to your BMS data. The easiest way would be to connect the seco...

Hello @foxy-kitty, For each battery and therefore for each associated TAO BMS : Make sure that the capacity has been correctly defined in the TA...

Glad to hear it. Have a great holiday. François

My mistake. Thank you @foxy-kitty for your comment. It's all about the SOC and not the SoH. I corrected it in my previous message. Concerning the 78...

Hello Stephen, That's good news.We now know what the problem is.I'll contact you by e-mail for the rest.

Thermistors are not connected to fuses. The fact that the fuses are disconnected therefore has no impact on the measurement. It's surprising that yo...

Hello Stephen,Have you tried measuring the resistance on both sides of the connector? There is one side where the contacts are more easily accessible ...

Hello Stephen, In order to be sure that the problem really comes from the cable, it would be necessary for you to measure the resistance that seems ...