All right. So it looks like everything's back to normal and it was just a connection problem. Remember to secure the battery cable with a cable tie....

The TAO BMS consumes 30mA when switched on.We have not measured the current drawn by the balancing board when the TAO EMS is switched off, but it is v...

The thermistor connector is as shown in the attached photo.I'll let you test it and get back to me. By the way, in your previous message you said th...

Indeed, even if the BMS is OFF, the balancing board is still powered, and the leakage current must also be taken into account.This means low power con...

Hello Stephen, First of all, you need to make sure that the cable is properly connected on the BMS board. After switching off your BMS and disconn...

Hello Guy,Indeed, you can make a custom connection using a commercially available USB/RS485 adapter. You'll find enclosed instructions on how to do th...

Hello Matthew, I'd like to repost the photos that didn't make it into your previous message to clearly illustrate this exchange.First of all, I'd li...

Hello Matthew, If the information from the BMS is being displayed by the monitor, then communication is working and the cable is not the source of t...

Hello Matthew, What is the format of the file you originally uploaded with your previous post?It seems that this file is not supported as I was forc...

Hello Matthew, Could you tell me if the monitor measurements are displayed correctly when you connect the monitor to the BMS?Even if the cable is fa...

Hello Matthew, The first thing to do is to check that the problem is not with the cable. When you connect the monitor to the BMS, are the BMS measur...

Hello John, TAO EMS V1 has been out of distribution for under a year now. The new version of TAO EMS to be released in early 2024 has been designed ...

Hello Christian,Please feel free to consult the following topic which deals with this point: Regards,

Hello Mateo,It's good to see that things are looking better.The internal resistance of the cells is still higher than normal, but it's much less worry...

You can also create an 80-78% charging profile. In this way, charging stops at 80% and restarts at 78% if you consume. So the battery charge remains b...