Hi Francois, This could be implemented immediately with little effort if it were possible to change the charging profiles via the web interface.I ow...

Just use a normal NMEA Connector. Beware the rules of terminating the NMEA Network. Works fine for our SeatalkNG Network.      

I haven't come up with an elegant solution yet. At the moment the WS500 is controlled by the BMS via CAN and the alternator charges directly into th...

we are using wakespeed WS500 controller which is managed by CAN and the cerbo GX. The WS500 has also a "feature in" port. using this port and a...

After all, I decided to switch the backup battery only in case of UVP. For this I have installed an additional BEP 700 relay which switches the back...

Quote from philtao on 11/03/2023, 6:08 pm The Orion DC/DC charger would be activated by the engine contact key. You could also have the BMS activat...

thats it. thank you Philippe