I will answer each of your questions: yes all the power comes from the the "power in" wires (red and black wires with a 2A fuse on the positive wi...

I just tried Safari on iPad and I could change the CANbus charge / discharge limits. Is Safari up to date on your Mac? Has anyone else observed th...

Reducing charge current with CANbus instructions is a good idea. Reducing the charge voltage is a good way to avoid charging the battery above a cer...

As you are always connected to shore I guess all the 230V for cooking, computers, TV... comes directly from the shore and does not go through the char...

Hi Andres, Good to hear that you are progressing on your installation. The "full" voltage is a personal choice. Battery manufacturers say 3.65V p...

Thanks @foxy-kitty, I could not have said it better - all is correct. Just to summarize: if outputs 1 & 2 are those that control the charger...

It seems that you are confusing two cables: the USB / RJ11 (or RJ45) cable to connect to the PC / Monitor (supplied with the BMS) - this cable is ...

A few users have done it and it works fine. If the Victron shunt is 500A / 50mV (the standard one), then its resistance is 100 µOhm. This value has...

Bonjour Michel, As tu pu te connecter au moniteur avant cela? Si oui, qu'est ce qui a changé depuis? Si c'est la première fois, quelle address IP...

Thanks @skokie for the link to off-grid-garage video. That is very interesting (once he gets into the topic). We can now all understand why it is im...

I am not sure it will make a big difference as the temperature gradient will not be much on a thick copper link and a short distance. I would drill t...

Attached is an example for the connection of the Blue Sea PN770x latching relay using the TAO LRD. Please note that in the past I may have posted (o...

These are the only changes made in the v1.31 update, so it is not a critical / security update and there is nothing unsafe about v1.30 firmware. As...

BMS firmware v1.31: bug fix: if CCM has disabled the charge and if a trigger activates an additional output, then that output is not deactivated u...