philtao
@philtao
Admin
Membre
Inscription: Avr 27, 2020
Last seen: Nov 18, 2024
Sujets: 25 / Réponse: 332
Répondre
RE: Pouvez vous m'aider dans l choix des relais?

Choisir le bon relais est important, car c'est un élément de sécurité... et sa défaillance peut avoir des conséquences graves. Je ne peux pas vous co...

Il y a 3 ans
Répondre
RE: Faut il prévoir un coupe circuit manuel?

Oui, il est indispensable de pouvoir isoler manuellement la charge, la conso ou la batterie. Cela peut se faire en ajoutant un interrupteur de dér...

Il y a 3 ans
Répondre
RE: Est-ce impératif de placer un solénoïde de stop en plus des relais sur les circuits charge et conso ?

Si l'ouverture des relais charge et conso a le même effet qu'un solénoïde d'isolation de la batterie, je ne vois pas l'utilité de ce solénoïde.

Il y a 3 ans
Répondre
RE: Fonction timer?

Pas de fonction timer intégrée au BMS. Je ne suis pas sûr d'en comprendre l'utilisation souhaitée et le bénéfice. Si l'objectif est d'avoir une ...

Il y a 3 ans
Répondre
RE: Replacing my AGM's with Lithium

Bonjour Michel, Relais bistable double bobine: Ce type de relais est très intéressant car il ne consomme aucun courant quelque soit son état (ouver...

Il y a 3 ans
Répondre
RE: intra-battery pack connections

Hi Jens, You will just need to change the value of the shunt resistance in the BMS parameters (see attached screen shot). The standard shunt resis...

Il y a 3 ans
Répondre
RE: Aux Battery size in Monitor

Hello Jens, The battery from the link is 69.5 mm long. It is longer than the standard 18650 battery. The maximum battery length that will fit in ...

Il y a 3 ans
Répondre
RE: Questions diverses

Bonjour Tom, Coupure de la charge par relais "déconnexion de la charge" entre batterie et chargeur: C'est à mon avis un dernier recours si un char...

Il y a 3 ans
Répondre
RE: LiFePo4 Out of Balance

I do not have the GX monitor as all the information from the Cerbo is available on the phone / tablet... and I never need to look at it. In any case...

Il y a 4 ans
Répondre
RE: LiFePo4 Out of Balance

Hi Leigh, Based on the end of charge voltages the unbalance seems important. If we consider cell 4 as full (3.67v), cell 3 at 3.39v might be only 9...

Il y a 4 ans
Répondre
RE: Leaving lead behind, moving to LiFePO4 on our Trimaran

Nothing special. BMS --> LED: standard Ethernet Cat5 cable BMS --> Monitor: RJ11 / RJ12 6P4C (6 positions / 4 connected) - cable with 4 wi...

Il y a 4 ans
Répondre
RE: intra-battery pack connections

Hi Phil, Cable length is important when connecting cells or batteries in parallel so that all the parallel strings of cells / batteries have exactly...

Il y a 4 ans
Répondre
RE: Paramètrage SmartSolar MPPT Victron.

Bonjour Jean-Jacques, Effectivement, ca ne fait pas plaisir de ne pas pouvoir profiter de tous ces watts potentiels! En principe c'est à cela que s...

Il y a 4 ans
Répondre
RE: Choix relais

J'ai un peu plus d'info sur les relais mentionné par Michel. C'est un relais électromagnétique NCR bistable de 100A (NRL709F). J'en ai parlé autou...

Il y a 4 ans
Répondre
RE: Leaving lead behind, moving to LiFePO4 on our Trimaran

Nice looking boat! She must be fast... Let me know if you fly by BOI, we could catch-up for a beer. It sounds like you are all set... just have to...

Il y a 4 ans
Page 19 / 24